One of the best ways to keep a car and driver safe is to keep the vehicle in good repair. There is more to car maintenance than filling up with quality fuel and adding the proper grade motor oil. Especially for Canadian motorists that deal with extreme winter temperatures, it reduces the chance for accidents and, as a result, keeps the rates lower on Ontario vehicle insurance.

Check automobile windshield chip repair wipers periodically for dry rot and cracks. Worn wipers can hinder visibility in inclement weather. Make sure the blades are properly attached to the arm to prevent metal or hard plastic from scraping and scratching the windshield. Repair or replace a windshield with dings or cracks.



Not wearing disposable rubber gloves when handling auto glass Oils and dirt from the installers' hands can contaminate the bonding service of the windshield.

Repair chips or cracks immediately: Debris, rocks, or even pebbles can cause small dings or cracks in your windshield. Though they don't seem like much now, it is imperative to get these fixed. If the problem is caught in time, these can be a simple inexpensive fix and a windshield repair is not needed. If not these cracks and dings will grow, greatly weakening the strength of your windshield and putting you in a dangerous and expensive situation. Even regular window check-up at an Ogden auto glass location is advisable.

If you don't have the time to go to a windshield repair facility on your own, there are mobile windshield repair companies that will come to you. You can easily schedule an appointment with the mobile company to come to your home and fix your windshield on the weekends or come to your job and fix it during your lunch break.

Stay away from the sun. Park inside a garage when you can and use a protective windshield covering when you can't. If you let heat build up inside the car while you park, you might weaken the windshield and cause the crack to grow.

To further strengthen the windshield, the auto glass is subjected to a tempering phase. The sheet is heated to a temperature of 1565 degrees Fahrenheit or 850 degrees Celsius. It is then subjected to blasts of cold air. A piece of PVB plastic is sandwiched between two pieces of auto glass. The sandwich is heated inside an autoclave. This bonds the components together tightly and removes any trapped air.